Feeds:
Posts
Comments

Posts Tagged ‘Patriotic Star quilt pattern’

A few days ago I posted photos of my Patriotic Star quilt block and I have had several requests for the instructions on how to make this block. I have written out the instructions for both the Patriotic Star quilt block and the instructions on how to make the table runner.

You can view and save these instructions as a pdf file by clicking on the highlighted text Patriotic-Stars-Pattern

I have also put together a photo tutorial on how to construct this block. Note: These instructions are photo intensive and I have the photos at a small size so more can fit on the screen. Click on any photo for a larger view.

Fabrics

1 Fat Quarter or equivalent of the fabrics listed below will make 1 Patriotic Star block, plus a few more!

Blue Star fabric, Red Star fabric, Red and White striped fabric, OR solid red and solid white fabric to make your own striped fabric.
Background fabric – 1 Fat Quarter or equivalent

Refer to the PDF file (see above) for the cutting dimensions.

The piecing instructions for the Star Points are written (and illustrated below) so that you don’t have to use any special piecing rulers.

NOTE: For a great red / white wavy striped fabric, I recommend visiting the Quilted Dragon  website.  (www.quilteddragon.com) She is a quilting friend and has great fabric Click on the link to go directly to the fabric  Red & White Striped Fabric 

Tools

If you would prefer use special piecing rulers to make the elongated triangles that are used in the Patriotic Star Block, I recommend the following:

Peaky & Spike Templates by Marti Michelle
http://www.FromMarti.com

Tri-Recs Tool from EZ Quilting

These template sets should be available at your local quilt shop.


Star Center – Pieced Strips

Take the 1 inch x 2-1/2 inch pieces of the Solid Red and Solid White fabrics and stitch them together along the long edges. Press to one side.

 

 

 


Take the 1 inch x 4-1/2 inch pieces of the Solid Red and Solid White fabrics and stitch them together along the long edges. Press to one side.

 

 


Take the 2-1/2 x 2-1/2 inch piece of the Blue Star fabric and the two (sewn) striped pieces and place them EXACTLY as shown.

Stitch these pieces together like a 4-Patch and press as desired.

 

 


The completed Star Center block is shown. This piece should measure 4-1/2 x 4-1/2 inches square, including seam allowances.

Make 1 Star Center for each block you are making.

 

 

 


Star Center – Striped Fabric

If you are using Red and White striped fabric, place the pieces a shown in the photo at the far left. Stitch together like a 4-Patch to form the Star Center. Press as desired.  This piece should measure 4-1/2 x 4-1/2 inches square, including seam allowances.

Make 1 Star Center for each block you are making.

 


Star Points – Using Templates/Rulers

If you are using piecing templates/rulers, follow the directions to make the following 4-1/2 inch square Star Point blocks.

For EACH Patriotic Star Block you will need the following –

1 – Star Point with Blue fabric on the left and Red fabric on the right. (See upper left)

1 – Star Point with Red fabric on the left and Blue fabric on the right. (See upper right)

2 – Star Points with Red fabric on the left and Red fabric on the right. (See bottom left and right)

If you are NOT using piecing templates/rulers, go to the next section.

 


Star Points – without rulers

On a padded surface, WRONG sides up, pin OPPOSITE corners of 2 – 4-1/2 x 2-1/2 inch Star Point fabric EXACTLY as shown in the photo.

Note: – I like to use a padded and gridded ironing pad or a folded terry towel on top of my ironing board. Yes, I know that my ironing mat is a little (??) grubby. I use it quite a lot with my piecing!

Start with the Red Star fabric to make the Star Points.

 


Take the “flaps” that were to the inside, and fold them out as shown at the right. Make sure that the fold that is being created is along a long straight line. The RIGHT side of the fabric is on the top.

Press to make a crease line along the fold line. You now have right and left leaning long triangle pieces.

Your Star Points should look EXACTLY like the photos at the left.

 


Remove the pins and re-position the (new) long triangles as shown at the right.

DO NOT TRIM YET!!

 

 


Take a light 4-1/2 inch fabric square and position ONE Star Point as show at the right. Make sure that the lower (straight) corner of the triangle matches the same corner of the background square.

 

 

 


Carefully open the Star Point and place a pin or two on the “under flap” of fabric.

Instead of pins, use fabric glue stick or similar product to hold in place

Stitch just inside of the fold line.

 


Fold the Star Point back into position and make sure it is lined up properly. When satisfied with the placement of the triangle, trim the excess under flap and background fabric to 1/4 inch from the seam.

If desired, press the diagonal seam OPEN!

The “open” seam make quilting MUCH easier!

 


Place the remaining Star Point on the 4-1/2 inch background square exactly as shown in the photo. Make sure that the lower (straight) corner of the triangle matches the same corner of the background square.

 

 

 


Carefully open the Star Point and place a pin or two on the “under flap” of fabric.

Instead of pins, use fabric glue stick or similar product to hold in place

Stitch just inside of the fold line.

 

 


Fold the Star Point back into position and make sure it is lined up properly. When satisfied with the placement of the triangle, trim the excess under flap and background fabric to 1/4 inch from the seam.

If desired, press the diagonal seam OPEN!

 

 


The Red Star fabric Star Point Unit is now completed! When finished, the Star Point Unit should measure 4-1/2 inches square, which includes seam allowances.

Make a total of 2 Red Star fabric Star Point Units for each block.

 

 


Then make –

1 – Star Point with Blue fabric on the left and Red fabric on the right.

1 – Star Point with Red fabric on the left and Blue fabric on the right.

 

 


Putting the Patriotic Star Block Together

Place the Star Center, the 4-1/2 inch square Background Corner pieces and the Star Points EXACTLY as shown in the photo to form the Patriotic Star Block.

Stitch the block together and press as desired.

 

 


The completed Patriotic Star Block should measure 12-1/2 inches square, including seam allowances.

Here are two blocks, the one at the left has the pieced stripes in the Star Center and the block on the right has the striped (printed) fabric in the Star Center.

 

 

 

 

 

 

 


I hope you enjoy making the Patriotic Star Quilt Block and use it in your projects.

Here is the link to the PDF file for the Patriotic Star Table Runner Patriotic-Stars-Pattern  which includes the instructions on how to piece the Star Points without templates or special rulers.

Please feel free to leave a comment.

Advertisements

Read Full Post »

Happy 4th of July everyone! I hope you have a wonderful day with family and friends. If you are traveling, travel safe, if you are staying home, enjoy the day!

I was doing some traveling last month – I taught longarm quilting classes in way South Texas, and then went to visit my daughter Heather, and her family in Savannah, GA. I had a GREAT time in both places!

While I was traveling, of course I had to stop in a few fabric shops, where I picked up some great patriotic fabrics. I also did a little bit of Internet shopping for patriotic fabrics. Here is a little bit of what I got – click on any photo for a larger view.

With all this great fabric laying around,  of course, I had to stitch at least some of the fabric into something! So I designed a Patriotic Star pattern!

It is a 12 inch block, using three different fabrics to form a “sort of” American Flag design. To make the elongated Star Points I used the Tri-Rec’s piecing template/ruler and the center is a 4 Patch variation.

Then I made a few more of these blocks and put them together to make a table runner.

I took the photos later in the day and it looks like the background fabric is light blue, but it really is solid white, bleached muslin, that was pre-washed. I off set the stars a bit to give the pattern more “movement”.

Here is a close up of the stars in the table runner. Again, the background fabric looks light blue, but it really is solid white!

No, it is not quilted yet, but it will be soon! I will be quilting it with a new (quilting) template I have been working on. When I get it quilted and the template is ready, I’ll let you know.

If you have some time and want to do some quilting or piecing for a great organization, I recommend American Hero Quilts. This is an organization that makes and gives quilts to wounded service men and women. To visit the American Hero Quilts website Click Here 

Have a wonderful Independence Day – or 4th of July – holiday.

Read Full Post »